Embroidery Machine Parts
Parts - Embroidery Machine Parts
-
Embroidery Machine External USB Reader 'Black Box' - Barudan, Tajima, Toyota, SWF
Embroidery Machine External USB Reader 'Black Box' for Barudan, Tajima, Toyota, SWF, Happy
MADE IN THE USA!!!
Our "Black Box" device offers an easy way to help you load, select and transfer embroidery designs to your embroidery machine.
Just plug the USB stick into our device, spin the dial until your file is shown, and then it's ready to download. That's it!
Our all-in-one device is the most inexpensive file reader/transfer system on the market. The "Black Box" connects to the external data input port on your embroidery machine.
-
-
13% off
Embroidery equipment wireless upgrade
The USB to WiFi device can be installed on most all embroidery machines on the market, giving the operator the ability to wirelessly send embroidery designs to all the machines in the embroidery factory.
USB to WiFi device looks and acts very similar to a regular USB memory/storage device. However the 'USB to WiFi' sticks also has wireless networking abilities. Unlike a traditional USB memory stick which stores data physically on the stick, this device reads and writes to a remote PC directory.
UPC: 689354349821
About: USB to WiFi
Contact US -
-
Thread Break Sensor - Butterfly
Thread Break Sensor - For Butterfly 1201 Embroidery Machine.
Replace this photo sensor when the machine is not detecting threads break properly.
-
-
60% off
Reciprocator - Butterfly
Reciprocators are desinged to break to keep from destoying your machine if the operator hits the hoop.
Very with the pictures that this is the correct replacement as there are several types.
-
-
-
-
-
-
-
84% off
Presser Foot
Presser Foot for a Butterfly Embroidery Machine. This is for 1 presser foot for a Butterfly Embroidery Machine
-
-
Reciprocator
Reciprocators are designed to break to keep from destroying your machine if the operator hits the hoop.
Contact US
Financing -
-
Hoops Adjustment Tightening Screw
Hoops Screw for embroidery machine hoop. Use this screw to replace worn out tension screws on your embroidery machine hoops. Brass type used to tighten with a wrench.
-
Needle Plate for Tajima (USED)
Only 10 left in stockThis is a Flat Type Needle Plate for Tajima embroidery machines. It has the hole in the corner for positioning. This is a USED needle plate. Works with Tajima TMEX.
-
Butterfly Threading Tube - 240mm
Only 1 left in stockApproximately 240mm in length. Snap in tips.
Used to keep threads from tangling. Contact US -
Butterfly Embroidery Machine Knife - Bottom Stationary Knife
Only 5 left in stockThe is the Bottom Stationary Knife for a Butterfly Embroidery Machine
-
Butterfly Embroidery Machine Knife - Upper Moving Knife
Only 5 left in stockThe is the Upper Moving Knife for a Butterfly Embroidery Machine
-
Butterfly Embroidery Machine Knives Set - Upper and Lower Knives Together
Only 5 left in stockThis set contains both the upper and bottom knives for the Butterfly Embroidery Machine
-
Reciprocator for a Butterfly Single Head 1201 Embroidery Machine
Only 5 left in stockThis is a reciprocator for a Butterfly Single Head 1201 Embroidery Machine. Replace your broken reciprocators with this model, for a Single Head 1201 Embroidery Machine Please verify with the pictures before purchasing
-
Reciprocator for a Butterfly Single Head 1501 Embroidery Machine
Only 5 left in stockThis is a reciprocator for a Butterfly Single Head 1501 Embroidery Machine. Replace your broken reciprocators with this model, for a Single Head 1501 Embroidery Machine Please verify with the pictures before purchasing
-
Reciprocator for a Butterfly multihead Embroidery Machine
Only 5 left in stockThis is a reciprocator for a Butterfly multihead Embroidery Machine. Replace your broken reciprocators with this model, for a multihead Embroidery Machine
Please verify with the pictures before purchasing
